Terminal Data Acquisition Converter Zigbee DTU

Terminal data acquisition converter Zigbee DTU Features：

1.High performance industrial grade wireless module

2.High performance industrial grade 16-bit microprocessor

3.Low-power design, minimize power consumption

4.With metal casing, protection grade IP30. Metal shell and system security isolation,particularly suitable for applications where the industrial

5.Wide power input (DC 5~24V)

6.WDT external hardware monitoring, CPU comes with WDT, double watchdog designed to ensure system stability

7.RS485 interface built-in ESD protection

8.Power interface built-in reverse phase protection and ESD protection

9.Lightning protection antenna interface (optional)

Terminal data acquisition converter Zigbee DTU easy to use

Industrial terminal interface that is especially suitable for industrial applications
Standard TCP and RS485, RS232 interface (custom)
Intelligent data terminals, power to enter data transfer State
Provides powerful management software, equipment management
Easy to use, flexible, multiple working mode selection
Easy system configuration and maintenance interfaces
Supports serial software upgrade and remote maintenanProvides complete technical manuals and technical support
Product features

Proyek	Isi
Well graphic monitor	Supporting wireless load and displacement sensors capable of measuring power, maximum and minimum loads, stroke, stroke;
Wellhead parameters monitoring	Downstream data using standard A11 wireless digital sensor Protocol can be complementary radio collector, measuring current, power, balance, motor three-phase current, three-phase voltages, active power and power factor;
Oil field remote control	Supporting wireless digital pressure and temperature transducers measuring oil pressure (or manifold pressure), pressure, and temperature;
Alarm system monitoring	Downstream data using standard A11 wireless digital sensor Protocol can be matched with radio acquisition, remote well opening, stop well, complete speech before the remote on/off alarm;

Wireless parameters

Proyek	Isi
Wireless module	Domestic industrial-grade wireless module F8913D (downlink wireless digital sensor protocol data using standard triumph the four modernizations) imports of industrial-grade wireless module, XBee PRO S2B/S2C (downlink data using standard agreement A11 wireless digital sensor)
Wireless communication	Supports standard ZigBee PRO 2007; a variety of network topologies, fast, reliable and safe.
Theoretical bandwidth	153.6Kbps
Transmission power	≤10dBm
Receiver sensitivity	≤-104dBm

Hardware systems

Proyek	Isi
CPU	Industrial-grade 16-bit microprocessor ATXMEGA128A1
FLASH	2MB (press 1 wells, 2-hour gathering a power graph, the historical figure of about 68 days) (extension to 8MB)

Interface type

Proyek	Isi
Serial port	a RS232 and RS485 interface (built-in ESD protection), the standard ModBus RTU protocol traffic, can access third-party PLC or data collection terminals and other equipment. Serial port parameters are as follows: Data bits: 8 bits Stop bit: 1 bit Check: no parity Serial port rate: 38400 bits/s Protocol name: of the SM5100 ZigBee DTU Protocol V1.01
Ethernet	A network port, using the standard ModBus TCP protocol communications, or PLC can access third-party data collection terminals and other equipment.
Led definitions	It has a power on / downlink data receiving, sending indicator
Antenna interface	Standard SMA female antenna interface, the characteristic impedance of 50 ohms
Power interface	Block Interface Built-in power supply Reverse polarity protection

Power supply

Power consumption

Physical characteristics

Proyek	Isi
Casing metal	Protection grade IP30. Shell and system security isolation, especially for industrial field applications
Overall dimensions	91.5×58.5×25 mm (excluding antenna and installation pieces)
Weight	200g

Other parameters